Transfer Case Shift Lever Conversion 241 or 241OR

When installing a Jeep JK or JKU 241 or 241OR Transfer Case into an older model Jeep, like a TJ, YJ, or a XJ, this shift lever arm will convert the transfer case from having the arm pointing down to the correct orientation of pointing up. This transfer case lever will give you the proper offset to be in-line with the older model Jeeps shifters. This will also convert the shift lever arm from the stud mount to a 5/16" hole. This arm has been proven to work with a companion flange front output, it may be compatible with other yoke types, but has not been tested. This transfer case lever arm is laser cut from 1/4" steel and CNC bent in-house and will be shipped bare steel and it will need to be painted or powder coated prior to installation. 

Tech Article: Swapping a JK or JKU 241 or 241OR Transfer Case Into an Older Jeep Model